The Walinga Auger discharge system provides the operator with the ability to handle multiple products on any load. All augers are fabricated "in house" in order to provide optimal quality control.
All trough augers are installed on a "UHMW" wear liner to provide maximum durability along with minimum maintenance. The Auger Transitions are designed to provide free flow of material from Trough to Vertical to Boom. The result — minimum product damage with maximum flow rate.
The Walinga design employs a 9in. (23cm) diameter trough auger with helicoid flighting on a 2 1/2 in (63mm) diameter shaft. Direct drive by a heavy duty, spring mounted high torque hydraulic motor incorporates automatic surge overload protection that controls the speed of the discharge augers. The design includes a heavy duty thrust bearing on the drive end and hanger bearing at the discharge end. A plastic (UHMW) liner in the auger trough is supplied to provide a tighter fit between auger and trough as well as prolonged life of trough.
The rotation of the Boom is by means of RC80 primary reduction and RD50 secondary reduction drives. Rated strength is 14,000 lbs. (6343 kg). Hydraulic over load protection is provided through a cross over relief valve.